-
NISSAN VR38DETT PONCAM  
 
MSRP
＄440.00USD *Sold as a set of 2 (IN or EX)
■ Pre-set valve timing
■ Works best 'bolt-on' type turbos
■ Stable idling
■ Compatible with stock valve springs
■ Noticable, linear gains in performance
ENGINE
APPLICATION
PART # (EACH)
VR38DETT
R35　GT-R
IN
TA301C-NS01A
EX
TA301E-NS01A
IN/EX
DURATION
(°)
MAX CAM
LIFT
(mm)
MAX VALVE
LIFT
(mm)
COLD VALVE
CLEARANCE
(mm)
［±0.01］
VALVE TIMING
CENTERLINE
(°)
BASE
CIRCLE
Stock
valve springs
compatible
IN
258
10.30
10.00
0.30
124.0
Φ35.4
○
EX
266
10.30
9.97
0.33
115.0
Φ35.4
○
 
MSRP
＄440.00USD *Sold as a set of 2 (IN or EX)
■ High spec profiles for professional tuners /applications
■ Designed for high power setups
■ Requires high-performance valve springs
ENGINE
APPLICATION
VR38DETT
R35　GT-R
IN/EX
DURATION
（°）
MAX
CAM LIFT
(mm)
MAX
VALVE LIFT
(mm)
COLD VALVE
CLEARANCE
(mm)
［±0.01］
VALVE TIMING
CENTERLINE
(°)
BASE
CIRCLE
(Φ)
PART
NUMBER
Stock
valve springs
compatible
IN
274
11.30
11.00
0.30
124.0
35.4
TA301C-NS01B
×
EX
274
11.30
10.97
0.33
115.0
35.4
TA301E-NS01B
×
IN
282
11.30
11.00
0.30
124.0
35.4
TA301C-NS01C
×
EX
282
11.30
10.97
0.33
115.0
35.4
TA301E-NS01C
×
 
※STOCK Spec
IN/EX
DURATION
(°)
MAX CAM
LIFT
(mm)
MAX VALVE
LIFT
(mm)
COLD VALVE
CLEARANCE
(mm)
［±0.01］
VALVE TIMING
CENTERLINE
(°)
BASE
CIRCLE
Stock
valve springs
compatible
IN
238
9.46
9.16
0.30
124.0
Φ35.5
○
EX
248
9.78
9.45
0.33
115.0
Φ35.5
○
''VALC' profile features- Velocity, Acceleration, Lift, Control
 ■Optimized 'velocity' and 'acceleration'.
 ■Designed for high power setups.
 ■Optimizes engine performance.
 ■Higher lift than other profiles of the duration.
 ■Reduced stress/wear on the valve train.
 
The VALC profile allows the valves to open faster and for longer. This translates to faster lift and increased area under the 'lift curve' (see fig. ①) which in turn generates more power. (Greater area under the 'lift curve' = greater air intake)  
①
・CAM ACCELERATION：LOW
・LIFT：LOW
・AIR INTAKE：LOW
・CAM ACCELERATION：HIGH
・LIFT：HIGH
・AIR INTAKE：HIGH
Conventional profile
High lift profile without taking lifter size/radius into account.
 
Unlike the valve opening, the VALC profile ensures that the valves close at a slower rate, helping to prevent common valve train related issues.
With a conventional direct-acting valve train, the maximum lift is usually determined by the size/diameter of the valve lifter. Selecting a high-lift camshaft without taking this into consideration often results in the camshaft lobes travelling beyond the surface of the valve lifter. This causes the lobe to make contact with the edge of the lifter, damaging both components over time. （see fig. ②）
Therefore, the ideal performance orientated high-lift camshaft needs to have a profile that maximizes lobe travel on the lifter without exceeding the outer edge.
②
High lift profile without taking lifter size/radius into account.
VALC profile camshafts have achieved this ideal by deliberately reducing the maximum cam velocity to limit lobe travel on the lifter surface.　（Maximum cam velocity = lobe travel distance on lifter)　Compared to standard profile camshafts of the same lift, VALC profile camshafts are able to then then off-set the difference for even greater lift/performance gains.
Conventional profile based on lifter size/radius.
'VALC' profile.
''VALC' profile + additional lift.
Lift comparison between a conventional profile and 'VALC' profile.
 Conventional profile
 'VALC' profile
 'VALC' profile + additional lift.
 
 
Compatible with variable valve timing

The camshafts work together with the factory intake variable valve timing for noticeable performance improvements across the range
 
Reliable lubrication

Optimized oil feed hole diameter and design ensures a steady flow of oil to the journals.
 
Specially made lightweight and durable cores.

Specially made robust hollow cores for a lightweight yet highly durable camshaft.
 
Valve timing pre-set at IN124°EX115°

Same valve timing as stock VR38DETT. Works seamlessly with the stock ECU.