|
GDB-C/D JDM METAL CATALYZER |
|
|
Improved
efficiency & cleaner air!
A must have upgrade for all GDB SUBARU IMPREZA. |
Expreme metal catalyzer
for the WRX GDB is now available. When used in conjunction
with the Expreme exhaust manifold will help greatly
enhance your performance gain. Expremes total exhaust
setup is highly recommended. |
|
|
APPLICATION |
GDB - C / D |
YEAR |
Nov 2002〜May 2004 |
NOTES |
TWIN Throttle T/C |
|
|
|
Metal Catalizer Only |
Part No.:193095 |
MSRP $1,470.00
USD
|
|
|
|
|
![](each-product_img/gdb_metal_Catalyzer/ph_engine_car.jpg) |
|
|
![](each-product_img/gdb_metal_Catalyzer/ph_graph_engine_test.gif) |
|
|
|
|
Overview |
|
|
EXPREME Metal Catalizer |
![](each-product_img/gdb_metal_Catalyzer/ph_gr_fulloutline_expreme.jpg) |
|
|
Genuine
Parts |
![](each-product_img/gdb_metal_Catalyzer/ph_gr_fulloutline_pure.jpg) |
|
|
The
3 stages of pipe diameter of 75-70-65 were decided for best power
and torque combination. The result was the highest efficiency, quality
and the pipe angles for best exhaust flow.
|
Genuine has φ60 pipe for the
whole area. Inner diameter is small and has sharp angle bends
which causes bad exhaust efficiency. |
|
|
|
T/C Flange |
|
|
EXPREME
|
![](each-product_img/gdb_metal_Catalyzer/ph_gr_flange_expreme.jpg) |
|
|
Genuine Part
|
![](each-product_img/gdb_metal_Catalyzer/ph_gr_flange_pure.jpg) |
|
|
A divider plate was
made between the main port & actuator conversion. Higher efficiency
exhaust flow.
← |
Without the divider plate
there is exhaust interference. |
|
|
|
Certification |
|
|
Emissions certificate is also
included for street legal requirements in Japan. (NOTE. The certification
is for Japan ONLY) |
|
|
Metal Catalyst |
|
|
Superb Durability/ Minimal Pressure Loss/ Cleaner Emissions |
← |
Complying with 150cpsi standards for superiority in exhaust efficiency and purification efficiency. |
|
|
|
|
|
Exit Side Flange |
|
|
EXPREME |
![](each-product_img/gdb_metal_Catalyzer/ph_gr_out_flange_expreme.jpg) |
|
|
Standard Part |
![](each-product_img/gdb_metal_Catalyzer/ph_gr_out_flange_pure.jpg) |
|
|
The size prior to the flange is φ65 and following the flange is φ60. Suits the standard gaskets. Compatible with all aftermarket mufflers.
← |
φ60 is too narrow, reduces the exhaust effectiveness. |
|
|
|
Genuine &TOMEI ECU Compatible |
|
|
Can be used in conjunction with
the factory ECU and still benefit with the performance increase.
For optimum results it is best used with the TOMEI ECU for best
overall results. (Optional packages below). |
|
|
|
|
OTHER RELATED PARTS |
|
|
Packages |
MSRP |
Metal
Catalizer+Exhaust Manifold |
$2,790
USD |
Exhaust
Manifold |
$1,320
USD |
|
|
|
|
Copyright (C) 2009 TOMEI POWERD,Inc. All
Rights Reserved. |
|